International Classic Line Variable Controls

» Return to international electronic control page

Design the system you want. 2 or 3 on/off functions plus 1 variable function gives you numerious installation possibilities.

2 functions on/off plus 1 variable function
Use our 3 function control box to install e.g. a pump, a light and a blower with variable output. Or maybe you would prefer a variable pump, a blower and a light. You decide!

3 functions on/off plus 1 variable function and heater outlet - designed for customization
The 4 function control box can be used in the same manner as the 3 function control box. However, you now have 1 extra outlet which can be used for e.g. regulation of the venturi via a solenoid valve (instead of an air control), water inlet or any other feature you prefer on your system. Download our FAQ where you can see some of the possibilities - only your imagination sets the limit!

Initial setting of variable output
It is possible, via the touches, to set the minimum and maximum on the variable output for e.g. a blower.

Power and water level indication
The control boxes are programmed to indicate power on the system by a flashing LED on the touch. The LED will also flash when the automatic dry-out of the air sytem is running and /or when water leves is obtained.

Approvals
The control boxes are manufactured according to European norms EN60335-1 with focus on EN60335-2-60 where relevant.

On/Off
Ctrl

Main
Page

500
Digi

Downloads:
» Leaflet-A-GB Classic Line Control

Manuals

» 20-0312 - Variable Speed Electronic control box - Classic Line
» 20-0313 - Variable Speed Electronic control box - Classic Line
» 20-0314 - Variable Speed Electronic control box - Classic Line
» 20-0344 - Variable Speed Electronic control box - Classic Line